If you're unfamiliar with Pipe and drape you might be thinking that it's difficult to understand...but it's really quite easy! This guide will walk you through pipe and drape components and set-ups.
First, let's get a basic understanding of the pieces involved in pipe and drape . There are only 4 components parts to a pipe and drape backdrop:
1) Uprights - the aluminum vertical pipe the sets the height of your display.
2) Bases - the steel plate that goes underneath each upright to provide overall stability and support.
3) Drape Support Rod - the adjustable horizontal pipe that sets with of your display and from which the drapes are hung.
4) Drape Panels - the fabric that hangs from the drape support rod and completes the look of your backdrop.
Now that you know the four components of pipe and drape (uprights, bases, drape support rods, and fabric drape panels), we can examine some of the ways that pipe and drape works together to form some great room dividers, backdrops, and booths!
2. How to assemble pipe and drapes
It's simple to use our Pipe and drape to form a wide variety of set-ups!
The first thing to look at is the height that you'll need. We have many upright sizes that determine the overall height of your display, so knowing your height requirement is very useful. (Tip: make sure it will clear the ceiling height! If you order an 8 foot tall upright and the ceiling is only 7 feet 10 inches high, your uprights won't work in that space.)
Now we measure the width of the area that you need to cover. To figure out the number of pieces that you'll need, you want to have a solid idea of the width that you are covering with pipe and drape.
The easiest configuration that you can build is a linear (in-line) backdrop.
Let's say you have a wall (or part of a wall) that you're trying to cover. You would need to measure the height and the width (left to right) of the area that you're trying to cover.
The pieces used for this backdrop are: 2 uprights, 2 bases, 1 drape support rod, and the drape (the amount of panels depends on the fabric that you prefer).
Our widest drape support rod adjusts to 14 feet wide, but what if you're covering a space wider than 14 feet? It's very easy to extend the coverage of your pipe and drape!
-All of our uprights have 4 slots cut-out near the top, spaced at 90 degree angles.
-Our drape support rods feature hooks at each end that simply hook in to one of the slot cut-outs in the upright.
-Using these drape support rod hooks and the 90 degree angle slots at the top of each upright, you can continue your pipe & drape coverage.
*You can repeat this process until you've covered the total area.
3. Making a booth is easy
Our customers make booths for many purposes; some of the more popular booth uses are portable pipe and drape photo booths, voting booths, private dressing rooms, and pipe & drape Trade show booths . To start, let's look at setting up a booth that is all the same height, such as a photo booth, voting booth, or changing station.
To create a "boxed" (enclosed) booth like the one above, you would need 4 uprights, 4 bases, 4 drape support rods, and drape on all sides.
Pipe and drape trade show booths are also easy to make, using a similar set-up to the one above.
The only thing that differs from the pipe and drape photo booth / changing room set-up is that this set-up does not have a "front" drape support rod or drapes. To do this, you would need 4 uprights, 4 bases, 3 drape support rods, and drape panels to go on the back and two sides.
Remember, the width of each side can vary based on the drape support rod that you choose. Any or all sides can be as narrow as 6 feet, or as wide as 14 feet, depending on the drape support rods used.
Based on the venue and/or personal preference, you may need to have the sides (side walls) of the trade show booth at a shorter height than the back of the booth (the back wall). This is the reason that our fixed and break apart uprights have slots cut-out at other heights as well, not just at the top. Our 8 foot fixed upright, for example, has four 90° slots cut out at 3 feet high, and again at the top of the upright. This allows a drape support rod to be hooked in at a lower height as well, not just at the top of the upright, making the trade show booth have a back wall at one height and the side walls at a shorter height.
Utilizing the lower slot cut-outs in the uprights, you can easily make a pipe and drape trade show booth. Shown below is a booth with an 8 foot high back wall and 3 foot high sides walls (often the standard size of most booths at convention centers). The back wall portion can be adjusted in width (such as 6 to 10 feet wide) and the side walls can "come out" toward you at an adjustable space.
4. Helpful Tips to Keep in Mind:
1) Every upright needs a base underneath it. Unless you already have some pipe and drape hardware, you should always have the same amount of bases as you do uprights.
2) Each end of the drape support rod needs an upright to hold it up. Otherwise, it wouldn't be supported at each hook.
3) The amount of drape panels you need depends on the fabric, as our various fabrics have different panel widths.
4) Remember that Pipe and drape is intended to be a temporary display, not a permanent structure; it is not bolted to a wall or the floor. Never use it in an unsafe manner.
5) The examples shown in this guide are only a few of the ways that pipe and drape set-ups can be constructed. Use your imagination, and the possibilities are endless!
If you are still unsure about the best display for your event, please contact us
Hiring a Pipe and drape rental firm on one hand permits you to get a new look and really feel to your cubical each them you participate in an event. on the other hand, you can get a low cost beat up utilized piano for or so, and that may well be just fine, but typically these pianos finish up costing you the same quantity of revenue as a low-end new piano due to the fact of the repairs you'll have to spend for by means of your piano tuner.
It is normally up to the Pipe and Drape wholesale to return your deposit in a timely manner, Have you ever wondered what it's like to be the captain of a luxury cruise ship? Most people would tell you that renting is a waste of time and dollars. The truth is that it comes down to many person variables. And don't really feel as though you have to clean up especially. So often retain that deposit anything separate; that's never to be utilized as rent, it's normally a separate security deposit.
But some would, remember, if you do come across a chain video store that hasn't filed for bankruptcy, you might not necessarily obtain the film title or the breadth of selection that you'd hoped for. The cause behind it is that the foreign workers due to quick-let keep opt for to lease instead of spending in the real estate.
